[PATCH 0/4] Pinctrl cleanup for MSM8916, add sensors for samsung-a2015

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch sets prepares for adding the accelerometer/magnetometer used
in msm8916-samsung-a2015 by:

  1. Cleaning up existing pinctrl configurations
     (Bjorn recently suggested using a simpler form)
  2. Restoring the minimal drive strength for the I2C pins by default
     (The higher drive strength is only set for apq8016-sbc)

And finally the accelerometer/magnetometer is added to the
msm8916-samsung-a2015 device tree.

Stephan Gerhold (4):
  arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end
    of file
  arm64: dts: qcom: msm8916: Simplify pinctrl configuration
  arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on
    DB410c
  arm64: dts: qcom: msm8916-samsung-a2015: Add
    accelerometer/magnetometer

 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi     | 187 ++--
 .../boot/dts/qcom/msm8916-longcheer-l8150.dts |  42 +-
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi    | 861 +++++++-----------
 .../qcom/msm8916-samsung-a2015-common.dtsi    | 150 +--
 .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts |  20 +-
 .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts |  20 +-
 6 files changed, 508 insertions(+), 772 deletions(-)

-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux