On Thu 28 May 20:15 PDT 2020, Jonathan Marek wrote: > On 5/28/20 11:05 PM, Bjorn Andersson wrote: > > On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote: > > > > > Add dts nodes for apps_smmu and USB for both sm8150 and sm8250. > > > > > > Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a > > > few changes. Notably, the HDK865 dts has regulator config changed a bit based > > > on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150). > > > > Can you please elaborate on this discrepancy? I do remember seeing > > something odd when looking at this, but it seems like I didn't document > > it anywhere... > > > > Thanks, > > Bjorn > > > > Mainly there's a few regulators with different min/max voltage values. For > example with l16a, downstream has min/max 3024000/3304000 but upstream > sm8250-mtp has 2704000/2960000. I also added l18a. > Thanks, we'll double check these. Regards, Bjorn > > > > > > Jonathan Marek (6): > > > arm64: dts: qcom: sm8150: add apps_smmu node > > > arm64: dts: qcom: sm8250: add apps_smmu node > > > arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes > > > arm64: dts: qcom: sm8250: Add USB and PHY device nodes > > > arm64: dts: qcom: add sm8150 hdk dts > > > arm64: dts: qcom: add sm8250 hdk dts > > > > > > arch/arm64/boot/dts/qcom/Makefile | 2 + > > > arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++ > > > arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++ > > > arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++ > > > arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++ > > > 5 files changed, 1384 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts > > > create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts > > > > > > -- > > > 2.26.1 > > >
