Re: [PATCH 2/2] clk: qcom: gcc: Add missing UFS clocks for SM8150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12-05-20, 18:25, Stephen Boyd wrote:
> Quoting Vinod Koul (2020-04-26 21:55:34)
> > On 25-04-20, 12:11, Stephen Boyd wrote:
> > > Quoting Vinod Koul (2020-04-23 21:43:11)
> > > > Add the missing ufs card and ufs phy clocks for SM8150. They were missed
> > > > in earlier addition of clock driver.
> > > > 
> > > > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> > > > ---
> > > >  drivers/clk/qcom/gcc-sm8150.c | 84 +++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 84 insertions(+)
> > > > 
> > > > diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
> > > > index 5c3dc34c955e..4354620fa12d 100644
> > > > --- a/drivers/clk/qcom/gcc-sm8150.c
> > > > +++ b/drivers/clk/qcom/gcc-sm8150.c
> > > > @@ -2881,6 +2881,45 @@ static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = {
> > > >         },
> > > >  };
> > > >  
> > > > +/* external clocks so add BRANCH_HALT_SKIP */
> > > > +static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
> > > > +       .halt_check = BRANCH_HALT_SKIP,
> > > > +       .clkr = {
> > > > +               .enable_reg = 0x7501c,
> > > > +               .enable_mask = BIT(0),
> > > > +               .hw.init = &(struct clk_init_data){
> > > > +                       .name = "gcc_ufs_card_rx_symbol_0_clk",
> > > 
> > > Any reason to not use .fw_name?
> > 
> > Did i understand it correct that you would like these to have .fw_name
> > for parent? Should we start adding these clocks in DT description?
> 
> Sorry I misread the patch. This isn't a parent name description so .name
> is correct here.

No worries, I will add fixes and send the update

Thanks
-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux