Hi Bjorn, Any feedback on this series? Regards, Loic On Thu, 26 Mar 2020 at 12:56, Loic Poulain <loic.poulain@xxxxxxxxxx> wrote: > > This series is a new tentative for adding MSM8996 CPU scaling support > based on the previous Ilia's series, with some of the latest comments > addressed. > > This series has been tested with dragonboard-820c and cpufreq-bench. > The CPU opps are limited to maximum nominal frequencies (no turbo). > > Ilia Lin (2): > soc: qcom: Separate kryo l2 accessors from PMU driver > dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 > > Loic Poulain (2): > clk: qcom: Add CPU clock driver for msm8996 > arch: arm64: dts: msm8996: Add opp and thermal > > .../devicetree/bindings/clock/qcom,kryocc.txt | 17 + > arch/arm64/boot/dts/qcom/msm8996.dtsi | 338 ++++++++++++- > drivers/clk/qcom/Kconfig | 10 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/clk-alpha-pll.h | 6 + > drivers/clk/qcom/clk-cpu-8996.c | 547 +++++++++++++++++++++ > drivers/perf/Kconfig | 1 + > drivers/perf/qcom_l2_pmu.c | 90 +--- > drivers/soc/qcom/Kconfig | 3 + > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/kryo-l2-accessors.c | 56 +++ > include/soc/qcom/kryo-l2-accessors.h | 12 + > 12 files changed, 1001 insertions(+), 81 deletions(-) > create mode 100644 Documentation/devicetree/bindings/clock/qcom,kryocc.txt > create mode 100644 drivers/clk/qcom/clk-cpu-8996.c > create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c > create mode 100644 include/soc/qcom/kryo-l2-accessors.h > > -- > 2.7.4 >
