This series is a new tentative for adding MSM8996 CPU scaling support based on the previous Ilia's series, with some of the latest comments addressed. This series has been tested with dragonboard-820c and cpufreq-bench. The CPU opps are limited to maximum nominal frequencies (no turbo). Ilia Lin (2): soc: qcom: Separate kryo l2 accessors from PMU driver dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 Loic Poulain (2): clk: qcom: Add CPU clock driver for msm8996 arch: arm64: dts: msm8996: Add opp and thermal .../devicetree/bindings/clock/qcom,kryocc.txt | 17 + arch/arm64/boot/dts/qcom/msm8996.dtsi | 338 ++++++++++++- drivers/clk/qcom/Kconfig | 10 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-alpha-pll.h | 6 + drivers/clk/qcom/clk-cpu-8996.c | 547 +++++++++++++++++++++ drivers/perf/Kconfig | 1 + drivers/perf/qcom_l2_pmu.c | 90 +--- drivers/soc/qcom/Kconfig | 3 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/kryo-l2-accessors.c | 56 +++ include/soc/qcom/kryo-l2-accessors.h | 12 + 12 files changed, 1001 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,kryocc.txt create mode 100644 drivers/clk/qcom/clk-cpu-8996.c create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c create mode 100644 include/soc/qcom/kryo-l2-accessors.h -- 2.7.4
