Hi Matthias,
static int geni_se_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -845,6 +868,34 @@ static int geni_se_probe(struct platform_device *pdev)
}
}
+#ifdef CONFIG_SERIAL_EARLYCON
+ wrapper->to_core.path = devm_of_icc_get(dev, "qup-core");
+ if (IS_ERR(wrapper->to_core.path))
+ return PTR_ERR(wrapper->to_core.path);
+ /*
+ * Put minmal BW request on core clocks on behalf of early console.
+ * The vote will be removed earlycon exit function.
+ *
+ * Note: We are putting vote on each QUP wrapper instead only to which
+ * earlycon is connected because QUP core clock of different wrapper
+ * share same voltage domain. If core1 is put to 0, then core2 will
+ * also run at 0, if not voted. Default ICC vote will be removed ASA
+ * we touch any of the core clock.
+ * core1 = core2 = max(core1, core2)
+ */
I don't really understand this part. According to the comment if we vote
(let's say) for core2 but not for core1 then:
core1: 0
core2: GENI_DEFAULT_BW
core1 = core2 = max(core1, core2)
or
core1 = core2 = max(0, GENI_DEFAULT_BW)
hence
core1 = core2 = GENI_DEFAULT_BW
What am I missing, why is it necessary to vote for both/all?
say core1 is for earlycon usecase
There is common switch to control both the QUP core clock. I guess most
appropriate description would be switch = max(vote_on_core1,
vote_on_core2) + default_vote.
During early bootup, vote_on_core1 = 0, vote_on_core2 = 0;
As earlycon was working even without voting it's core need because there
was some default vote present on the core switch by ICC during bootup.
So if any child(say SPI) of other QUP wrapper resumed and suspended
before earlycon wrapper comes up. This will make core clock to run at
zero and will cause NOC issue because vote_on_core1 = 0, vote_on_core2 =
0; and it seems default votes from core switch is removed ASA it's
voted on any core.
Regards,
Akash
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
