On Tue, Mar 10, 2020 at 9:14 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables
> should take care of this for us. Just use 0 instead so that we use the
> flags from the firmware. Also, remove specify dev_name() for the irq
> name so that we can get better information in /proc/interrupts about
> which device is generating interrupts.
>
Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-qcom-geni.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 17abf60c94ae..4efca130035a 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -549,8 +549,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
> init_completion(&gi2c->done);
> spin_lock_init(&gi2c->lock);
> platform_set_drvdata(pdev, gi2c);
> - ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq,
> - IRQF_TRIGGER_HIGH, "i2c_geni", gi2c);
> + ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq, 0,
> + dev_name(&pdev->dev), gi2c);
> if (ret) {
> dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
> gi2c->irq, ret);
> --
> Sent by a computer, using git, on the internet
>
