Re: [PATCH v2 1/3] i2c: qcom-geni: Let firmware specify irq trigger flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 10 Mar 08:43 PDT 2020, Stephen Boyd wrote:

> We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables
> should take care of this for us. Just use 0 instead so that we use the
> flags from the firmware. Also, remove specify dev_name() for the irq
> name so that we can get better information in /proc/interrupts about
> which device is generating interrupts.
> 
> Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-qcom-geni.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 17abf60c94ae..4efca130035a 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -549,8 +549,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
>  	init_completion(&gi2c->done);
>  	spin_lock_init(&gi2c->lock);
>  	platform_set_drvdata(pdev, gi2c);
> -	ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq,
> -			       IRQF_TRIGGER_HIGH, "i2c_geni", gi2c);
> +	ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq, 0,
> +			       dev_name(&pdev->dev), gi2c);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
>  			gi2c->irq, ret);
> -- 
> Sent by a computer, using git, on the internet
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux