On Mon, 24 Feb 2020 12:55:35 +0530, Amit Kucheria wrote: > As part of moving the thermal bindings to YAML, split it up into 3 > bindings: thermal sensors, cooling devices and thermal zones. > > The property #thermal-sensor-cells is required in each device that acts > as a thermal sensor. It is used to uniquely identify the instance of the > thermal sensor inside the system. > > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> > --- > .../bindings/thermal/thermal-sensor.yaml | 70 +++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c263000: interrupt-names: ['uplow'] is too short /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c263000: interrupts: [[0, 506, 4]] is too short /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c265000: interrupt-names: ['uplow'] is too short /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c265000: interrupts: [[0, 507, 4]] is too short See https://patchwork.ozlabs.org/patch/1242845 Please check and re-submit.
