On Fri, Feb 21, 2020 at 03:28:03PM -0800, Elliot Berman wrote: > Some implementors of PSCI may relax the requirements of the PSCI > architectural warm reset. In order to comply with PSCI specification, a > different reset_type value must be used. The alternate PSCI > SYSTEM_RESET2 may be used in all warm/soft reboot scenarios, replacing > the architectural warm reset. > > Signed-off-by: Elliot Berman <eberman@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/arm/psci.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml > index 8ef8542..a790e5a 100644 > --- a/Documentation/devicetree/bindings/arm/psci.yaml > +++ b/Documentation/devicetree/bindings/arm/psci.yaml > @@ -102,6 +102,11 @@ properties: > [1] Kernel documentation - ARM idle states bindings > Documentation/devicetree/bindings/arm/idle-states.txt > > + arm,psci-sys-reset2-type: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + reset_type parameter value to use during a warm or soft reboot. > + I would rather use param instead of type in the name. -- Regards, Sudeep
