On 8/8/2019 9:50 PM, Stephen Boyd wrote:
Quoting Maulik Shah (2019-08-07 23:12:27)
Add device binding documentation for Qualcomm Technology Inc's (QTI)
SoC sleep stats driver. The driver is used for displaying SoC sleep
statistic maintained by Always On Processor or Resource Power Manager.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
Signed-off-by: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
Your SoB chain is odd. The author is Mahesh? Otherwise, use the
Co-Developed-by tag.
corrected in v2.
---
.../bindings/soc/qcom/soc-sleep-stats.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.txt
diff --git a/Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.txt b/Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.txt
new file mode 100644
index 000000000000..ee40687ded34
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.txt
@@ -0,0 +1,36 @@
+* SoC Sleep Stats
+
+Always On Processor/Resource Power Manager maintains statistics of the SoC
+sleep modes involving lowering or powering down of the backbone rails - Cx
What is a 'backbone' rail?
done.
+and Mx and the oscillator clock, XO.
Drop the comma? XO is the oscillator clock.
done.
+
+Statistics includes SoC sleep mode type, number of times low power mode were
+entered, time of last entry, time of last exit and accumulated sleep duration.
+SoC Sleep Stats driver provides sysfs interface to display this information.
Can this document be YAML? Then it can be validated.
converted to YAML in v2.
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "qcom,rpmh-sleep-stats" or "qcom,rpm-sleep-stats".
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: The base address on the Always On Processor or Resource Power
+ Manager from where the stats are read.
+
+EXAMPLE 1:
+
+ rpmh_sleep_stats: soc-sleep-stats@c3f0000 {
+ compatible = "qcom,rpmh-sleep-stats";
+ reg = <0 0xc3f0000 0 0x400>;
Is this memory region in DDR? Or some specific IMEM location? I wonder
if it would be better to just have a pointer from the RPM node to this
memory region and then populate some stats if so.
Not a DDR.
+ };
+
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
