Re: [PATCH V2] mmc: mmc_test: Pass different sg lists for non-blocking requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Veerabhadrarao Badiganti (2020-02-19 01:44:31)
> Supply a separate sg list for each of the request in non-blocking
> IO test cases where two requests will be issued at same time.
> 
> Otherwise, sg memory may get unmapped when a request is done while
> same memory is being accessed by controller from the other request,
> and it leads to iommu errors with below call stack:
> 
>         __arm_lpae_unmap+0x2e0/0x478
>         arm_lpae_unmap+0x54/0x70
>         arm_smmu_unmap+0x64/0xa4
>         __iommu_unmap+0xb8/0x1f0
>         iommu_unmap_fast+0x38/0x48
>         __iommu_dma_unmap+0x88/0x108
>         iommu_dma_unmap_sg+0x90/0xa4
>         sdhci_post_req+0x5c/0x78
>         mmc_test_start_areq+0x10c/0x120 [mmc_test]
>         mmc_test_area_io_seq+0x150/0x264 [mmc_test]
>         mmc_test_rw_multiple+0x174/0x1c0 [mmc_test]
>         mmc_test_rw_multiple_sg_len+0x44/0x6c [mmc_test]
>         mmc_test_profile_sglen_wr_nonblock_perf+0x6c/0x94 [mmc_test]
>         mtf_test_write+0x238/0x3cc [mmc_test]
> 
> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>
> 
> ---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>

> Changes since V1:
>         - Freeing-up sg_areq memory.
>         - Added check to ensure sg length is equal for both the sg-lists
>           supplied in case of non-blocking requests.
> ---
>  drivers/mmc/core/mmc_test.c | 42 ++++++++++++++++++++++++++++++++++++------
>  1 file changed, 36 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c
> index 492dd45..f8f884a 100644
> --- a/drivers/mmc/core/mmc_test.c
> +++ b/drivers/mmc/core/mmc_test.c
> @@ -1411,6 +1417,22 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
>                 err = mmc_test_map_sg(t->mem, sz, t->sg, 1, t->max_segs,
>                                       t->max_seg_sz, &t->sg_len, min_sg_len);
>         }
> +
> +       if (err || !nonblock)
> +               goto err;
> +
> +       if (max_scatter) {
> +               err = mmc_test_map_sg_max_scatter(t->mem, sz, t->sg_areq,
> +                                                 t->max_segs, t->max_seg_sz,
> +                                                 &sg_len);
> +       } else {
> +               err = mmc_test_map_sg(t->mem, sz, t->sg_areq, 1, t->max_segs,

'repeat' is always set to 1. Why not remove that argument and update the
code? As a follow up patch.

> +                                     t->max_seg_sz, &sg_len, min_sg_len);
> +       }
> +       if (!err && sg_len != t->sg_len)
> +               err = -EINVAL;
> +
> +err:
>         if (err)
>                 pr_info("%s: Failed to map sg list\n",
>                        mmc_hostname(test->card->host));
> @@ -1458,15 +1480,16 @@ static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz,
>                         sz = max_tfr;
>         }
>  
> -       ret = mmc_test_area_map(test, sz, max_scatter, min_sg_len);
> +       ret = mmc_test_area_map(test, sz, max_scatter, min_sg_len, nonblock);
>         if (ret)
>                 return ret;
>  
>         if (timed)
>                 ktime_get_ts64(&ts1);
>         if (nonblock)
> -               ret = mmc_test_nonblock_transfer(test, t->sg, t->sg_len,
> -                                dev_addr, t->blocks, 512, write, count);
> +               ret = mmc_test_nonblock_transfer(test, t->sg, t->sg_areq,
> +                                t->sg_len, dev_addr, t->blocks, 512, write,
> +                                count);

This is only called one time so it may be simpler to pass 't' instead of
pick it apart and pass it as many arguments. Not a problem in this
patch, besides that we're now passing even more arguments here making
this harder to read. Also, the blksz could be hardcoded in the function
instead of passing it as 512.

>         else
>                 for (i = 0; i < count && ret == 0; i++) {
>                         ret = mmc_test_area_transfer(test, dev_addr, write);
> @@ -1584,6 +1608,12 @@ static int mmc_test_area_init(struct mmc_test_card *test, int erase, int fill)
>                 goto out_free;
>         }
>  
> +       t->sg_areq = kmalloc_array(t->max_segs, sizeof(*t->sg), GFP_KERNEL);

It's more idiomatic to use sizeof(*t->sq_areq) here.

> +       if (!t->sg_areq) {
> +               ret = -ENOMEM;
> +               goto out_free;
> +       }
> +
>         t->dev_addr = mmc_test_capacity(test->card) / 2;
>         t->dev_addr -= t->dev_addr % (t->max_sz >> 9);
>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux