On Thu, Feb 13, 2020 at 08:50:13PM +0530, Manivannan Sadhasivam wrote: > On Tue, Feb 11, 2020 at 11:20:55AM -0800, Greg KH wrote: > > On Wed, Feb 12, 2020 at 12:11:30AM +0530, Manivannan Sadhasivam wrote: > > > Hi Greg, > > > > > > On Thu, Feb 06, 2020 at 05:57:55PM +0100, Greg KH wrote: > > > > On Fri, Jan 31, 2020 at 07:19:55PM +0530, Manivannan Sadhasivam wrote: > > > > > --- /dev/null > > > > > +++ b/drivers/bus/mhi/core/init.c > > > > > @@ -0,0 +1,407 @@ > > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > > +/* > > > > > + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. > > > > > + * > > > > > + */ > > > > > + > > > > > +#define dev_fmt(fmt) "MHI: " fmt > > > > > > > > This should not be needed, right? The bus/device name should give you > > > > all you need here from what I can tell. So why is this needed? > > > > > > > > > > The log will have only the device name as like PCI-E. But that won't specify > > > where the error is coming from. Having "MHI" prefix helps the users to > > > quickly identify that the error is coming from MHI stack. > > > > If the driver binds properly to the device, the name of the driver will > > be there in the message, so I suggest using that please. > > > > No need for this prefix... > > > > So the driver name will be in the log but that won't help identifying where > the log is coming from. This is more important for MHI since it reuses the > `struct device` of the transport device like PCI-E. For instance, below is > the log without MHI prefix: > > [ 47.355582] ath11k_pci 0000:01:00.0: Requested to power on > [ 47.355724] ath11k_pci 0000:01:00.0: Power on setup success > > As you can see, this gives the assumption that the log is coming from the > ath11k_pci driver. But the reality is, it is coming from MHI bus. Then you should NOT be trying to "reuse" a struct device. > With the prefix added, we will get below: > > [ 47.355582] ath11k_pci 0000:01:00.0: MHI: Requested to power on > [ 47.355724] ath11k_pci 0000:01:00.0: MHI: Power on setup success > > IMO, the prefix will give users a clear idea of logs and that will be very > useful for debugging. > > Hope this clarifies. Don't try to reuse struct devices, if you are a bus, have your own devices as that's the correct way to do things. thanks, greg k-h
