This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well. This includes two patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and multiple firmware versions, debugfs hook for rom erase and export of xhci-pci functions. Changes in v6: Move the renesas code into a seprate driver which invokes xhci-pci functions. Changes in v5: Added a debugfs rom erase patch, helps in debugging Squashed patch 1 & 2 as requested by Mathias Changes in v4: Rollback the delay values as we got device failures Changes in v3: Dropped patch 2 as discussed with Christian Removed aligned 8 bytes check Change order for firware search from highest version to lowest Added entry for new firmware for device 0x14 as well Add tested by Christian Changes in v2: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recurion for renesas_fw_download added MODULE_FIRMWARE added comment for multiple fw order Christian Lamparter (1): usb: renesas-xhci: Add the renesas xhci driver Vinod Koul (4): usb: xhci: export few functions usb: renesas-xhci: Add ROM loader for uPD720201 usb: renesas-xhci: allow multiple firmware versions usb: xhci: provide a debugfs hook for erasing rom drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-pci-renesas.c | 985 ++++++++++++++++++++++++++++ drivers/usb/host/xhci-pci.c | 18 +- drivers/usb/host/xhci-pci.h | 18 + 5 files changed, 1024 insertions(+), 7 deletions(-) create mode 100644 drivers/usb/host/xhci-pci-renesas.c create mode 100644 drivers/usb/host/xhci-pci.h -- 2.24.1
