On Fri 20 Dec 05:56 PST 2019, Loic Poulain wrote: > Add qcom Kconfig fragment which enables the appropriate symbols for > support of Qualcomm based boards, like the 'popular' dragonboards. > This permits to fully support the boards upstream without having to > rely on downstream deconfig changes. > > This patch has been tested with Dragonboard-410c and Dragonboard-820c. > As Catalin said, this should be added to the generic defconfig. I have a few of these queued up already for v5.6 in linux-next, but please do send me additional patches and I'll include them in the qcom/defconfig branch. > qcom.config fragment has been generated with ./script/diffconfig > > Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx> > --- > arch/arm64/configs/qcom.config | 57 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 arch/arm64/configs/qcom.config > > diff --git a/arch/arm64/configs/qcom.config b/arch/arm64/configs/qcom.config > new file mode 100644 > index 0000000..9358df8 > --- /dev/null > +++ b/arch/arm64/configs/qcom.config > @@ -0,0 +1,57 @@ > +CONFIG_ARM_QCOM_CPUFREQ_HW=y > +CONFIG_BT_HCIUART_3WIRE=y > +CONFIG_BT_HCIUART_QCA=y > +CONFIG_BT_HCIUART_RTL=y > +CONFIG_CRYPTO_DEV_QCOM_RNG=y =m > +CONFIG_EXTCON_QCOM_SPMI_MISC=y > +CONFIG_INTERCONNECT=y > +CONFIG_MFD_QCOM_RPM=y This is for 32-bit targets. > +CONFIG_PHY_QCOM_PCIE2=y =m > +CONFIG_PHY_QCOM_QMP=y =m > +CONFIG_PHY_QCOM_QUSB2=y =m > +CONFIG_PHY_QCOM_UFS=y I recently proposed a patch to add 8996 UFS support to the common QMP driver, so hopefully we can get that merged for v5.6 instead. > +CONFIG_PM8916_WATCHDOG=y =m > +CONFIG_POWER_RESET_QCOM_PON=y =m > +CONFIG_QCOM_APR=m > +CONFIG_QCOM_FASTRPC=y =m > +CONFIG_QCOM_RMTFS_MEM=m > +CONFIG_QCOM_RPMHPD=y > +CONFIG_QCOM_RPMPD=y > +CONFIG_QCOM_SOCINFO=m > +CONFIG_QCOM_WCNSS_CTRL=m > +CONFIG_QCOM_WCNSS_PIL=m > +CONFIG_SCSI_UFS_QCOM=y =m > +CONFIG_SND_SOC_CROS_EC_CODEC=m > +CONFIG_SND_SOC_MAX98927=m > +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m > +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m > +CONFIG_VIDEO_QCOM_CAMSS=m > +CONFIG_VIDEO_QCOM_VENUS=m > +CONFIG_WCN36XX=m > +CONFIG_BT_QCA=m > +CONFIG_BT_QCOMSMD=m > +CONFIG_INTERCONNECT_QCOM=y > +CONFIG_INTERCONNECT_QCOM_MSM8974=y > +CONFIG_INTERCONNECT_QCOM_QCS404=y > +CONFIG_INTERCONNECT_QCOM_SDM845=y > +CONFIG_INTERCONNECT_QCOM_SMD_RPM=y Selected as needed by previous options. > +CONFIG_PHY_QCOM_UFS_14NM=y Follows CONFIG_PHY_QCOM_UFS, and should be replaced by CONFIG_PHY_QCOM_QMP > +CONFIG_QCOM_CLK_RPM=y > +CONFIG_REGULATOR_QCOM_RPM=y These two are for 32-bit targets. Regards, Bjorn > +CONFIG_SND_COMPRESS_OFFLOAD=y > +CONFIG_SND_SOC_COMPRESS=y > +CONFIG_SND_SOC_MSM8996=m > +CONFIG_SND_SOC_QCOM_COMMON=m > +CONFIG_SND_SOC_QDSP6=m > +CONFIG_SND_SOC_QDSP6_ADM=m > +CONFIG_SND_SOC_QDSP6_AFE=m > +CONFIG_SND_SOC_QDSP6_AFE_DAI=m > +CONFIG_SND_SOC_QDSP6_ASM=m > +CONFIG_SND_SOC_QDSP6_ASM_DAI=m > +CONFIG_SND_SOC_QDSP6_COMMON=m > +CONFIG_SND_SOC_QDSP6_CORE=m > +CONFIG_SND_SOC_QDSP6_ROUTING=m > +CONFIG_SND_SOC_RT5663=m > +CONFIG_SND_SOC_SDM845=m > +CONFIG_VIDEOBUF2_DMA_SG=m > +CONFIG_WCN36XX_DEBUGFS=y > -- > 2.7.4 >
