On Fri, Dec 20, 2019 at 02:56:00PM +0100, Loic Poulain wrote: > Add qcom Kconfig fragment which enables the appropriate symbols for > support of Qualcomm based boards, like the 'popular' dragonboards. > This permits to fully support the boards upstream without having to > rely on downstream deconfig changes. > > This patch has been tested with Dragonboard-410c and Dragonboard-820c. > > qcom.config fragment has been generated with ./script/diffconfig > > Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx> > --- > arch/arm64/configs/qcom.config | 57 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 arch/arm64/configs/qcom.config > > diff --git a/arch/arm64/configs/qcom.config b/arch/arm64/configs/qcom.config > new file mode 100644 > index 0000000..9358df8 > --- /dev/null > +++ b/arch/arm64/configs/qcom.config > @@ -0,0 +1,57 @@ > +CONFIG_ARM_QCOM_CPUFREQ_HW=y > +CONFIG_BT_HCIUART_3WIRE=y > +CONFIG_BT_HCIUART_QCA=y > +CONFIG_BT_HCIUART_RTL=y > +CONFIG_CRYPTO_DEV_QCOM_RNG=y > +CONFIG_EXTCON_QCOM_SPMI_MISC=y > +CONFIG_INTERCONNECT=y > +CONFIG_MFD_QCOM_RPM=y > +CONFIG_PHY_QCOM_PCIE2=y > +CONFIG_PHY_QCOM_QMP=y > +CONFIG_PHY_QCOM_QUSB2=y > +CONFIG_PHY_QCOM_UFS=y > +CONFIG_PM8916_WATCHDOG=y > +CONFIG_POWER_RESET_QCOM_PON=y > +CONFIG_QCOM_APR=m > +CONFIG_QCOM_FASTRPC=y > +CONFIG_QCOM_RMTFS_MEM=m > +CONFIG_QCOM_RPMHPD=y > +CONFIG_QCOM_RPMPD=y > +CONFIG_QCOM_SOCINFO=m > +CONFIG_QCOM_WCNSS_CTRL=m > +CONFIG_QCOM_WCNSS_PIL=m > +CONFIG_SCSI_UFS_QCOM=y > +CONFIG_SND_SOC_CROS_EC_CODEC=m > +CONFIG_SND_SOC_MAX98927=m > +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m > +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m > +CONFIG_VIDEO_QCOM_CAMSS=m > +CONFIG_VIDEO_QCOM_VENUS=m > +CONFIG_WCN36XX=m > +CONFIG_BT_QCA=m > +CONFIG_BT_QCOMSMD=m > +CONFIG_INTERCONNECT_QCOM=y > +CONFIG_INTERCONNECT_QCOM_MSM8974=y msm8974 is arm32 and should be dropped. Brian
