Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 18, 2019 at 10:37:53AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Dec 18, 2019 at 4:41 AM Sandeep Maheswaram (Temp)
> <sanm@xxxxxxxxxxxxxx> wrote:
> > +  assigned-clock-rates:
> > +    description:
> > +      Should be 19.2MHz (19200000) for MOCK_UTMI_CLK
> > +      >=125MHz (125000000) for MASTER_CLK in SS mode
> > +      >=60MHz (60000000) for MASTER_CLK in HS mode
> > +    maxItems: 2
> >
> > You can still express some limits here even if we don't go all out
> > with the "oneOf".  AKA I think this is better:
> >
> > assigned-clock-rates:
> >   items:
> >     - const: 19200000
> >     - minimum: 60000000
> >       description: >= 60 MHz in HS mode, >= 125 MHz in SS mode
> >
> > Facing error when i add as above.
> > properties:assigned-clock-rates: {'items': [{'const': 19200000}, {'minimum': 60000000}]} is not valid under any of the given schemas
> > Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/usb/qcom,dwc3.example.dts' failed

Update dtschema and you should get a better error message now.

I believe the problem is we require both minimum and maximum to be 
specified or none. Maybe we should relax that, but OTOH I doubt 4GHz is 
valid.

Rob



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux