The reset described is the phy reset so it should be named ufsphy, so
update it and add the UFS card reset
Earlier reset description was incorrect as phy reset was pointed to
'rst' as well as 'ufsphy' so both phy and core attempted to reset this
causing UFS to not come up. This was discovered with 870b1279c7a0
("scsi: ufs-qcom: Add reset control support for host controller")
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index f36d621a53e2..6a351e0cb3a6 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -517,8 +517,9 @@
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
+ resets = <&gcc GCC_UFS_PHY_BCR>,
+ <&gcc GCC_UFS_CARD_BCR>;
+ reset-names = "ufsphy", "rst";
clock-names =
"core_clk",
--
2.23.0
