Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathias,

On 26-11-19, 17:59, Mathias Nyman wrote:
> On 21.11.2019 6.54, Vinod Koul wrote:
> > On 06-11-19, 14:08, Vinod Koul wrote:
> > > This series add support for Renesas USB controllers uPD720201 and uPD720202.
> > > These require firmware to be loaded and in case devices have ROM those can
> > > also be programmed if empty. If ROM is programmed, it runs from ROM as well.
> > > 
> > > This includes two patches from Christian which supported these controllers
> > > w/o ROM and later my patches for ROM support and multiple firmware versions.
> > 
> > Greg, Mathias
> > 
> > Any feedback on this?
> > 
> 
> I need to take a fresh look at this series, there is a lot of code.

Let me know if you if you have any suggestions for review. I did try to
split it up logically so we have chunks to review independently.

Thanks
-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux