On 06-11-19, 14:08, Vinod Koul wrote: > This series add support for Renesas USB controllers uPD720201 and uPD720202. > These require firmware to be loaded and in case devices have ROM those can > also be programmed if empty. If ROM is programmed, it runs from ROM as well. > > This includes two patches from Christian which supported these controllers > w/o ROM and later my patches for ROM support and multiple firmware versions. Greg, Mathias Any feedback on this? > > Changes in v5: > Added a debugfs rom erase patch, helps in debugging > Squashed patch 1 & 2 as requested by Mathias > > Changes in v4: > Rollback the delay values as we got device failures > > Changes in v3: > Dropped patch 2 as discussed with Christian > Removed aligned 8 bytes check > Change order for firware search from highest version to lowest > Added entry for new firmware for device 0x14 as well > Add tested by Christian > > Changes in v2: > used macros for timeout count and delay > removed renesas_fw_alive_check > cleaned renesas_fw_callback > removed recurion for renesas_fw_download > added MODULE_FIRMWARE > added comment for multiple fw order > > Christian Lamparter (1): > usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM > > Vinod Koul (3): > usb: xhci: Add ROM loader for uPD720201 > usb: xhci: allow multiple firmware versions > usb: xhci: provide a debugfs hook for erasing rom > > drivers/usb/host/xhci-pci.c | 911 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 911 insertions(+) > > -- > 2.23.0 -- ~Vinod
