From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Add the remoteproc node for the modem on msm8974.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
[luca@xxxxxxxxx: cleanups, add label to smd-edge node]
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Note: This patch needs "remoteproc: qcom_q6v5_mss: Validate each segment
during loading" from the mailing list to be functional.
arch/arm/boot/dts/qcom-msm8974.dtsi | 63 ++++++++++++++++++++++++-----
1 file changed, 54 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 6f24dc9a7924..b357cb51c0fb 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -21,12 +21,12 @@ reserved-memory {
#size-cells = <1>;
ranges;
- mpss@8000000 {
+ mpss_region: mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
- mba@d100000 {
+ mba_region: mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
@@ -62,8 +62,11 @@ rfsa@fd60000 {
};
rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
+
+ qcom,client-id = <1>;
};
};
@@ -807,6 +810,55 @@ rng@f9bff000 {
clock-names = "core";
};
+ remoteproc@fc880000 {
+ compatible = "qcom,msm8974-mss-pil";
+ reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+
+ qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
pronto: remoteproc@fb21b000 {
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
@@ -1524,13 +1576,6 @@ adsp {
qcom,smd-edge = <1>;
};
- modem {
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 12>;
- qcom,smd-edge = <0>;
- };
-
rpm {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
--
2.24.0
