[PATCH 3/5] arm64: dts: qcom: Add configuration for PM8950 and PMI8950 peripherals

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>

The PM(I)8950 feature integrated peripherals like ADC, GPIO
controller, MPPs, PON keys and others.
Add them to DT files that will be imported on boards having
this PMIC combo (or one of them, anyways).

Signed-off-by: Angelo G. Del Regno <kholk11@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8950.dtsi  | 187 ++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pmi8950.dtsi |  98 ++++++++++++++
 2 files changed, 285 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8950.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmi8950.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 000000000000..c5041349bfe1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8950_lsid0: pm8950@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_gpios: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				<0 0xc1 0 IRQ_TYPE_NONE>,
+				<0 0xc3 0 IRQ_TYPE_NONE>,
+				<0 0xc4 0 IRQ_TYPE_NONE>,
+				<0 0xc5 0 IRQ_TYPE_NONE>,
+				<0 0xc6 0 IRQ_TYPE_NONE>,
+				<0 0xc7 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+
+			/* MPP_2: PA_THERM1 */
+			pa_therm {
+				pm8950_mpp2_def: pa_therm1_default {
+					pins = "mpp2";
+					function = "analog";
+					input-enable;
+					qcom,amux-route =
+						<PMIC_MPP_AMUX_ROUTE_CH6>;
+				};
+			};
+
+			/* MPP_4: QUIET_THERM */
+			case_therm {
+				pm8950_mpp4_def: case_therm_default {
+					pins = "mpp4";
+					function = "analog";
+					input-enable;
+					qcom,amux-route =
+						<PMIC_MPP_AMUX_ROUTE_CH8>;
+				};
+			};
+		};
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_adc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_adc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			vcoin {
+				label = "vcoin";
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+			};
+			vph_pwr {
+				label = "vph_pwr";
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+			};
+			die_temp {
+				label = "die_temp";
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_625mv {
+				label = "ref_625mv";
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_1250v {
+				label = "ref_1250v";
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_buf_625mv {
+				label = "ref_buf_625mv";
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+			pa_therm0 {
+				label = "pa_therm0";
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			pa_therm1 {
+				label = "pa_therm1";
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			xo_therm {
+				label = "xo_therm";
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			xo_therm_buf {
+				label = "xo_therm_buf";
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			case_therm {
+				label = "case_therm";
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pm8950_1: pm8950@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
new file mode 100644
index 000000000000..15c3e47bab0c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmi8950_lsid0: pmic@2 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_adc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			usbin {
+				label = "usbin";
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 4>;
+			};
+			dcin {
+				label = "dcin";
+				reg = <VADC_DCIN>;
+				qcom,pre-scaling = <1 4>;
+			};
+			vchg_sns {
+				label = "vchg_sns";
+				reg = <VADC_VCHG_SNS>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_625mv {
+				label = "ref_625mv";
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_1250v {
+				label = "ref_1250v";
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+			chg_temp {
+				label = "chg_temp";
+				reg = <VADC_SPARE2>;
+				qcom,pre-scaling = <1 1>;
+			};
+			usb_dp {
+				label = "usb_dp";
+				reg = <VADC_USB_DP>;
+				qcom,pre-scaling = <1 1>;
+			};
+			usb_dm {
+				label = "usb_dm";
+				reg = <VADC_USB_DM>;
+				qcom,pre-scaling = <1 1>;
+			};
+		};
+
+		pmi8950_gpio: gpios@c000 {
+			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				<0 0xc1 0 IRQ_TYPE_NONE>;
+		};
+
+		pmi8950_mpp: mpps@a000 {
+			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0x2 0xa0 0 IRQ_TYPE_NONE>,
+				<0x2 0xa1 0 IRQ_TYPE_NONE>,
+				<0x2 0xa2 0 IRQ_TYPE_NONE>,
+				<0x2 0xa3 0 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pmi8950_lsid1: pmic@3 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
-- 
2.21.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux