Re: [PATCH V2 2/2] tty: serial: qcom_geni_serial: Wakeup over UART RX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/10/2019 7:55 PM, Stephen Boyd wrote:
Quoting Akash Asthana (2019-10-10 02:46:43)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5180cd8..ff63728 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1306,6 +1317,29 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
                 return ret;
         }
+ if (!console) {
+               port->wakeup_irq = platform_get_irq(pdev, 1);
Should use platform_get_irq_optional() it seems.
OK

+               if (port->wakeup_irq < 0) {
+                       dev_err(&pdev->dev, "Failed to get wakeup IRQ %d\n",
+                                       port->wakeup_irq);
+               } else {
+                       irq_set_status_flags(port->wakeup_irq, IRQ_NOAUTOEN);
+                       ret = devm_request_irq(uport->dev, port->wakeup_irq,
+                               qcom_geni_serial_wakeup_isr,
+                               IRQF_TRIGGER_FALLING, "uart_wakeup", uport);
+                       if (ret) {
+                               dev_err(uport->dev, "Failed to register wakeup IRQ ret %d\n",
+                                               ret);
+                               return ret;
+                       }
+
+                       device_init_wakeup(&pdev->dev, true);
+                       ret = dev_pm_set_wake_irq(&pdev->dev, port->wakeup_irq);
Why can't we use dev_pm_set_dedicated_wake_irq() here?

If we use this API then handler "handle_threaded_wake_irq" uses device specific pm_runtime functions to wake the device and currently this

driver don't support runtime PM callbacks. Also, we want to register "qcom_geni_serial_wakeup_isr" as our IRQ handler for wakeup scenario.


+                       if (unlikely(ret))
+                               dev_err(uport->dev, "%s:Failed to set IRQ wake:%d\n",
+                                               __func__, ret);
+               }
+       }
         uport->private_data = drv;
         platform_set_drvdata(pdev, port);
         port->handle_rx = console ? handle_rx_console : handle_rx_uart;
@@ -1328,7 +1362,12 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
         struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
         struct uart_port *uport = &port->uport;
- return uart_suspend_port(uport->private_data, uport);
+       uart_suspend_port(uport->private_data, uport);
+
+       if (port->wakeup_irq > 0)
+               enable_irq(port->wakeup_irq);
+
Then this is hopefully done automatically?

+       return 0;
  }
static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux