Il giorno sab 5 ott 2019 alle ore 05:59 Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> ha scritto:
>
> On Sat 21 Sep 03:12 PDT 2019, kholk11@xxxxxxxxx wrote:
>
> > From: "Angelo G. Del Regno" <kholk11@xxxxxxxxx>
> >
> > Add the pinctrl driver to support pin configuration with the
> > pinctrl framework on MSM8976, MSM8956, APQ8056, APQ8076.
> >
> > Signed-off-by: Angelo G. Del Regno <kholk11@xxxxxxxxx>
> > ---
> > .../bindings/pinctrl/qcom,msm8976-pinctrl.txt | 183 +++
> > drivers/pinctrl/qcom/Kconfig | 10 +
> > drivers/pinctrl/qcom/Makefile | 1 +
> > drivers/pinctrl/qcom/pinctrl-msm8976.c | 1128 +++++++++++++++++
> > 4 files changed, 1322 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt
> > create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8976.c
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt
> > new file mode 100644
> > index 000000000000..4e944f84b7d7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt
> > @@ -0,0 +1,183 @@
> > +Qualcomm MSM8976 TLMM block
>
> As Linus indicated, please send your the DT bindings in separate
> patches.
>
> > +
> [..]
> > +Example:
> > +
> > + tlmm: pinctrl@1000000 {
> > + compatible = "qcom,msm8976-pinctrl";
> > + reg = <0x1000000 0x300000>;
> > + interrupts = <0 208 0>;
>
> <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>
>
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio-ranges = <&tlmm 0 0 145>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > +
> > + blsp1_uart2_active: blsp1_uart2_active {
> > + mux {
> > + pins = "gpio4", "gpio5", "gpio6", "gpio7";
> > + function = "blsp_uart2";
> > + };
> > +
> > + config {
> > + pins = "gpio4", "gpio5", "gpio6", "gpio7";
> > + drive-strength = <2>;
> > + bias-disable;
> > + };
> > + };
> > + };
> > diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> [..]
> > +static struct platform_driver msm8976_pinctrl_driver = {
> > + .driver = {
> > + .name = "msm8976-pinctrl",
> > + .owner = THIS_MODULE,
>
> No need to specify .onwer on platform_drivers anymore.
>
>
> Apart from that, I think this patch looks good.
>
> Regards,
> Bjorn
Thanks guys for the review.
Well, I did it in one patch after seeing this practice on other
patches, so I thought to replicate,
despite the well known rule... but yeah, of course, there's absolutely
no problem, I'll send the
two separate patches in a separate series and I'll do the same for the
GCC driver as well,
which doesn't seem that it got sent to the list for some obscure reason.
About the requested changes... sure, I will apply them and resend ASAP.
Thanks again!
