Re: [PATCH V2 12/12] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Gokul Sriram Palanisamy (2019-09-13 04:56:11)
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index 6a61a63..0ea026e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -431,6 +485,78 @@
>                                       "axi_m_sticky";
>                         status = "disabled";
>                 };
> +
> +               apcs: syscon@b111000 {
> +                       compatible = "syscon";
> +                       reg = <0x0b111000 0x1000>;
> +               };
> +
> +               tcsr_q6: syscon@1945000 {
> +                       compatible = "syscon";
> +                       reg = <0x01945000 0xe000>;
> +               };
> +
> +               tcsr_mutex_regs: syscon@193d000 {
> +                       compatible = "syscon";
> +                       reg = <0x01905000 0x8000>;
> +               };
> +
> +               apcs_glb: mailbox@b111000 {

This is the same as the syscon above. What's going on?

> +                       compatible = "qcom,ipq8074-apcs-apps-global";
> +                       reg = <0x0b111000 0x1000>;
> +
> +                       #mbox-cells = <1>;
> +               };




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux