IPQ8074 needs support for secure pil as well. Also, currently only unified firmware is supported. IPQ8074 supports split firmware for q6 and m3, so adding support for that. Also, this series is based on Govind’s, “[v4] Add non PAS wcss Q6 support for QCS404” https://www.spinics.net/lists/linux-remoteproc/msg03612.html [V2] Fixed all comments Gokul Sriram Palanisamy (12): remoteproc: qcom: Add PRNG proxy clock remoteproc: qcom: Add secure PIL support remoteproc: qcom: Add support for split q6 + m3 wlan firmware remoteproc: qcom: Add ssr subdevice identifier remoteproc: qcom: Update regmap offsets for halt register dt-bindings: clock: qcom: Add reset for WCSSAON clk: qcom: Add WCSSAON reset dt-bindings: mailbox: qom: Add ipq8074 APPS compatible mailbox: qcom: Add support for IPQ8074 APCS dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC arm64: dts: Add support for scm on IPQ8074 SoCs arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC .../devicetree/bindings/firmware/qcom,scm.txt | 1 + .../bindings/mailbox/qcom,apcs-kpss-global.txt | 1 + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 132 +++++++++++++++++ drivers/clk/qcom/gcc-ipq8074.c | 1 + drivers/mailbox/qcom-apcs-ipc-mailbox.c | 1 + drivers/remoteproc/qcom_q6v5_wcss.c | 158 +++++++++++++++++---- include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + 7 files changed, 265 insertions(+), 30 deletions(-) -- 1.9.1
