On Thu, 05 Sep 2019, Wolfram Sang wrote:
>
> > Fixes: 8bc529b25354 ("soc: qcom: geni: Add support for ACPI")
>
> Are you sure? From visual inspection, I don't see a correlation between
> this commit and the fix here.
This patch should have been part of the commit, or at the very least,
part of the set, alluded to above. Unfortunately, I was carrying
Bjorn's hack which simply returned early from geni_se_rx_dma_prep()
with an error, so it masked the issue.
> > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
> > ---
> > drivers/i2c/busses/i2c-qcom-geni.c | 14 ++++++++++----
> > 1 file changed, 10 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> > index a89bfce5388e..8822dea82980 100644
> > --- a/drivers/i2c/busses/i2c-qcom-geni.c
> > +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> > @@ -353,13 +353,16 @@ static void geni_i2c_tx_fsm_rst(struct geni_i2c_dev *gi2c)
> > static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
> > u32 m_param)
> > {
> > + struct device_node *np = gi2c->se.dev->of_node;
> > dma_addr_t rx_dma;
> > unsigned long time_left;
> > - void *dma_buf;
> > + void *dma_buf = NULL;
> > struct geni_se *se = &gi2c->se;
> > size_t len = msg->len;
> >
> > - dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
> > + if (!of_property_read_bool(np, "qcom,geni-se-no-dma"))
> > + dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
> > +
> > if (dma_buf)
> > geni_se_select_mode(se, GENI_SE_DMA);
> > else
> > @@ -392,13 +395,16 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
> > static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
> > u32 m_param)
> > {
> > + struct device_node *np = gi2c->se.dev->of_node;
> > dma_addr_t tx_dma;
> > unsigned long time_left;
> > - void *dma_buf;
> > + void *dma_buf = NULL;
> > struct geni_se *se = &gi2c->se;
> > size_t len = msg->len;
> >
> > - dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
> > + if (!of_property_read_bool(np, "qcom,geni-se-no-dma"))
> > + dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
> > +
> > if (dma_buf)
> > geni_se_select_mode(se, GENI_SE_DMA);
> > else
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
