On 9/4/2019 4:17 AM, Stephen Boyd wrote:
Quoting Taniya Das (2019-09-03 08:52:12)
Hi,
On 8/31/2019 3:04 AM, Doug Anderson wrote:
Hi,
On Fri, Aug 30, 2019 at 12:51 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
Some MMC cards fail to enumerate properly when inserted into an MMC slot
on sdm845 devices. This is because the clk ops for qcom clks round the
frequency up to the nearest rate instead of down to the nearest rate.
For example, the MMC driver requests a frequency of 52MHz from
clk_set_rate() but the qcom implementation for these clks rounds 52MHz
up to the next supported frequency of 100MHz. The MMC driver could be
modified to request clk rate ranges but for now we can fix this in the
clk driver by changing the rounding policy for this clk to be round down
instead of round up.
Since all the MMC rates are expressed as "maximum" clock rates doing
it like you are doing it now seems sane.
Looks like we need to update/track it for all SDCC clocks for all targets.
Yeah. It would be great if you can send the patches. Otherwise I'll
throw it on my todo list named 'forever'.
Sure Stephen, would send out the patches fixing them.
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
