Re: [PATCH 06/22] arm64: dts: qcom: pm8150: Add Base DTS file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Vinod Koul (2019-08-14 05:49:56)
> Add base DTS file for pm8150 along with GPIOs
> 
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm8150.dtsi | 41 ++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/pm8150.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> new file mode 100644
> index 000000000000..b533e254a203
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> @@ -0,0 +1,41 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> +// Copyright (c) 2019, Linaro Limited
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +&spmi_bus {
> +       pm8150_0: pm8150@0 {

I think node name should be 'pmic'

> +               compatible = "qcom,spmi-pmic";

This should also have the model number? "qcom,pm8150"?

> +               reg = <0x0 SPMI_USID>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               pm8150_gpios: gpio@c000 {
> +                       compatible = "qcom,pm8150-gpio";
> +                       reg = <0xc000>;
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc1 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc2 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc3 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc4 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc5 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc6 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc7 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc8 0 IRQ_TYPE_NONE>,
> +                                    <0 0xc9 0 IRQ_TYPE_NONE>,
> +                                    <0 0xca 0 IRQ_TYPE_NONE>,
> +                                    <0 0xcb 0 IRQ_TYPE_NONE>;
> +               };
> +       };
> +
> +       qcom,pm8150@1 {

Same comment, pmic@1.

> +               compatible ="qcom,spmi-pmic";
> +               reg = <0x1 SPMI_USID>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +       };
> +};




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux