On Wed, Mar 20, 2019 at 6:50 PM Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
>
> qcs404 has a single TSENS IP block with 10 sensors. The calibration data
> is stored in an eeprom (qfprom) that is accessed through the nvmem
> framework. We add the qfprom node to allow the tsens sensors to be
> calibrated correctly.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Hi Bjorn,
Could you please pick this patch and patch 22 in this series if you
have no other review comments? I can resend these separately if
required.
The driver (drivers/thermal/qcom/tsens-v1.c) was merged and only these
DT changes are pending.
Regards,
Amit
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index e8fd26633d57..7881792980b8 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -259,6 +259,16 @@
> reg = <0x00060000 0x6000>;
> };
>
> + qfprom: qfprom@a4000 {
> + compatible = "qcom,qfprom";
> + reg = <0x000a4000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + tsens_caldata: caldata@d0 {
> + reg = <0x1f8 0x14>;
> + };
> + };
> +
> rng: rng@e3000 {
> compatible = "qcom,prng-ee";
> reg = <0x000e3000 0x1000>;
> @@ -266,6 +276,16 @@
> clock-names = "core";
> };
>
> + tsens: thermal-sensor@4a9000 {
> + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
> + reg = <0x004a9000 0x1000>, /* TM */
> + <0x004a8000 0x1000>; /* SROT */
> + nvmem-cells = <&tsens_caldata>;
> + nvmem-cell-names = "calib";
> + #qcom,sensors = <10>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> tlmm: pinctrl@1000000 {
> compatible = "qcom,qcs404-pinctrl";
> reg = <0x01000000 0x200000>,
> --
> 2.17.1
>
