Changes pending from earlier reviews:
- Using macros from bits.h as suggested by Eduardo. I'd like to defer this
change to a separate series where I can convert over all the files (v0.1,
v1, v2) together. This series is getting quite long as it is.
Changes since v2:
- Simplify qcs404 device tree by changing 'passive' trips on non-throttling
devices to 'hot' type. Update the trip points too.
- Replace IP version reads with just a version major number in the feature
data structure. This is enough for differenting between IPs for different
code paths for now.
- Fix off-by-one typo in the REG_FIELD_FOR_EACH_ macro names.
Changes since v1:
- Anything not being throttled in the kernel converted to a hot trip point (no
cooling-maps)
- Don't print version number of the IP at boot
Description
-----------
Short term bandaid fixes to add support for more versions of the TSENS IP
is not proving to be very scalable. Here is a series to finally convert the
driver's core to use regmap_fields so that register addresses and bitfields
can be abstracted away from the code.
This series is posted as one to give a complete view of where I'm going
with this refactor. We can probably split it into smaller sets if required.
Currently it consists of the following parts:
- Patch 01-06: Style changes to make code easier to read (mostly naming
related). This has no functional change in the driver, it is a series of
search and replace operations. Ideally this will get merged first,
otherwise everything else will become painful :-)
- Patch 07-09: Merge the 8916 and 8974 source files into a single one
called v0_1.c denoting the version of the IP and open up more
opportunities for reuse.
- Patch 10: This is the core patch that adds IP-specific data based on two
data structures: tsens_features has bit flags to identify if a certain
feature is available in a version or not and an array of reg_field
pointers.
regfield_ids list the important fields across IP versions and are used as
an index.
This patch converts over all platforms except 8960 which currently
doesn't use DT data for tsens and has custom functions for everything. We
will get to it eventually, but it's conversion is not necessary for this
series to be merged.
- Patch 11-15: Clean ups, new functionality and bugfixes based on regmap_field
- Patch 16-18: Refactor the get_temp routine. We expect to have a single
get_temp routine once all the conversion is finished.
- Patch 20-22: Introduce qcs404 support using new regmap infrastructure.
Testing
-------
Since these changes affect every platform using TSENS, it should be
clarified that I have only been focussing on developing/testing this on
sdm845, msm8916, qcs404.
Future work
-----------
a. Get rid of get_temp_common in favour of get_temp_tsens_valid
b. irq support (coming soon)
c. Convert over 8960 to use regmap_field and as a result common functions
Amit Kucheria (23):
drivers: thermal: tsens: Document the data structures
drivers: thermal: tsens: Rename tsens_data
drivers: thermal: tsens: Rename tsens_device
drivers: thermal: tsens: Rename variable tmdev
drivers: thermal: tsens: Use consistent names for variables
drivers: thermal: tsens: Function prototypes should have argument
names
drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with
tsens-8974
drivers: thermal: tsens: Rename constants to prepare to merge with
tsens-8974
drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1
drivers: thermal: tsens: Introduce reg_fields to deal with register
description
drivers: thermal: tsens: Save reference to the device pointer and use
it
drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER
drivers: thermal: tsens: Add new operation to check if a sensor is
enabled
drivers: thermal: tsens: change data type for sensor IDs
drivers: thermal: tsens: Introduce IP-specific max_sensor count
drivers: thermal: tsens: simplify get_temp_tsens_v2 routine
drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing
drivers: thermal: tsens: Common get_temp() learns to do ADC conversion
dt: thermal: tsens: Add bindings for qcs404
drivers: thermal: tsens: Add generic support for TSENS v1 IP
arm64: dts: qcom: qcs404: Add tsens controller
arm64: dts: qcom: qcs404: Add thermal zones for each sensor
drivers: thermal: tsens: Move calibration constants to header file
.../bindings/thermal/qcom-tsens.txt | 14 +
arch/arm64/boot/dts/qcom/qcs404.dtsi | 272 ++++++++++++++++
drivers/thermal/qcom/Makefile | 4 +-
drivers/thermal/qcom/tsens-8916.c | 105 -------
drivers/thermal/qcom/tsens-8960.c | 84 ++---
drivers/thermal/qcom/tsens-common.c | 159 +++++++---
.../qcom/{tsens-8974.c => tsens-v0_1.c} | 166 +++++++++-
drivers/thermal/qcom/tsens-v1.c | 193 ++++++++++++
drivers/thermal/qcom/tsens-v2.c | 111 +++----
drivers/thermal/qcom/tsens.c | 100 +++---
drivers/thermal/qcom/tsens.h | 291 ++++++++++++++++--
11 files changed, 1166 insertions(+), 333 deletions(-)
delete mode 100644 drivers/thermal/qcom/tsens-8916.c
rename drivers/thermal/qcom/{tsens-8974.c => tsens-v0_1.c} (56%)
create mode 100644 drivers/thermal/qcom/tsens-v1.c
--
2.17.1
