RE: [PATCH 0/3] (Qualcomm) UFS device reset support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> On Wed 05 Jun 02:32 PDT 2019, Avri Altman wrote:
> 
> > >
> > > On Tue 04 Jun 22:50 PDT 2019, Avri Altman wrote:
> > >
> > > > Hi,
> > > >
> > > > >
> > > > > On Tue, Jun 4, 2019 at 12:22 AM Bjorn Andersson
> > > > > <bjorn.andersson@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > This series exposes the ufs_reset line as a gpio, adds support for ufshcd
> to
> > > > > > acquire and toggle this and then adds this to SDM845 MTP.
> > > > > >
> > > > > > Bjorn Andersson (3):
> > > > > >   pinctrl: qcom: sdm845: Expose ufs_reset as gpio
> > > > > >   scsi: ufs: Allow resetting the UFS device
> > > > > >   arm64: dts: qcom: sdm845-mtp: Specify UFS device-reset GPIO
> > > > >
> > > > > Adding similar change as in sdm845-mtp to the not yet upstream
> > > > > blueline dts, I validated this allows my micron UFS pixel3 to boot.
> > > > >
> > > > > Tested-by: John Stultz <john.stultz@xxxxxxxxxx>
> > > > Maybe ufs_hba_variant_ops would be the proper place to add this?
> > > >
> > >
> > > Are you saying that these memories only need a reset when they are
> > > paired with the Qualcomm host controller?
> > ufs_hba_variant_ops is for vendors to implement their own vops,
> > and as you can see, many of them do.
> > Adding hw_reset to that template seems like the proper way
> > to do what you are doing.
> >
> 
> Right, but the vops is operations related to the UFS controller, this
> property relates to the memory connected.
This is not entirely accurate. Those are vendor/board specific,
As the original commit log indicates:
" vendor/board specific and hence determined with
 the help of compatible property in device tree."

I would rather have this new vop:
void    (*device_reset)(struct ufs_hba *), Or whatever, 
actively set in ufs_hba_variant_ops, rather than ufshcd_init_device_reset
failing as part of the default init flow.

Thanks,
Avri

> 
> E.g I have a Hynix memory and John have a Micron memory that needs this
> reset and my assumption is that these memories will need their RESET pin
> toggled regardless of which controller they are connected to.
> 
> Regards,
> Bjorn




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux