Re: [PATCH v2 6/9] arm64: dts: qcom: msm8996: Add PSCI cpuidle low power states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 21 May 02:35 PDT 2019, Amit Kucheria wrote:

> Add device bindings for cpuidle states for cpu devices.
> 
> msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
> the same microarchitecture and the two clusters only differ in the
> maximum frequency attainable by the CPUs.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>

Applied

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index c761269caf80..4f2fb7885f39 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -95,6 +95,7 @@
>  			compatible = "qcom,kryo";
>  			reg = <0x0 0x0>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  			next-level-cache = <&L2_0>;
>  			L2_0: l2-cache {
>  			      compatible = "cache";
> @@ -107,6 +108,7 @@
>  			compatible = "qcom,kryo";
>  			reg = <0x0 0x1>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  			next-level-cache = <&L2_0>;
>  		};
>  
> @@ -115,6 +117,7 @@
>  			compatible = "qcom,kryo";
>  			reg = <0x0 0x100>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  			next-level-cache = <&L2_1>;
>  			L2_1: l2-cache {
>  			      compatible = "cache";
> @@ -127,6 +130,7 @@
>  			compatible = "qcom,kryo";
>  			reg = <0x0 0x101>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  			next-level-cache = <&L2_1>;
>  		};
>  
> @@ -151,6 +155,19 @@
>  				};
>  			};
>  		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +
> +			CPU_SLEEP_0: cpu-sleep-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "standalone-power-collapse";
> +				arm,psci-suspend-param = <0x00000004>;
> +				entry-latency-us = <40>;
> +				exit-latency-us = <80>;
> +				min-residency-us = <300>;
> +			};
> +		};
>  	};
>  
>  	thermal-zones {
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux