Re: [PATCH v3 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 22 Jan 16:28 PST 2019, Doug Anderson wrote:

> Hi,
> 
> On Mon, Jan 21, 2019 at 9:52 PM Bjorn Andersson
> <bjorn.andersson@xxxxxxxxxx> wrote:
> >
> > From: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> >
> > This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.
> >
> > Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > ---
> >
> > Changes since v2:
> > - Picked up Sibi's patch
> > - Fixed reg to work with address/size-cells as 2
> >
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++++++++++++++++
> >  1 file changed, 58 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 5cc2615461da..78df5f1bce2d 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -1617,6 +1617,64 @@
> >                         clock-names = "xo";
> >                 };
> >
> > +               mss_pil: remoteproc@4080000 {
> > +                       compatible = "qcom,sdm845-mss-pil";
> > +                       reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
> > +                       reg-names = "qdsp6", "rmb";
> > +
> > +                       interrupts-extended =
> > +                               <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> > +                       interrupt-names = "wdog", "fatal", "ready",
> > +                                         "handover", "stop-ack",
> > +                                         "shutdown-ack";
> > +
> > +                       clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> > +                                <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> > +                                <&gcc GCC_BOOT_ROM_AHB_CLK>,
> > +                                <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
> > +                                <&gcc GCC_MSS_SNOC_AXI_CLK>,
> > +                                <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> > +                                <&gcc GCC_PRNG_AHB_CLK>,
> > +                                <&rpmhcc RPMH_CXO_CLK>;
> > +                       clock-names = "iface", "bus", "mem", "gpll0_mss",
> > +                                     "snoc_axi", "mnoc_axi", "prng", "xo";
> > +
> > +                       qcom,smem-states = <&modem_smp2p_out 0>;
> > +                       qcom,smem-state-names = "stop";
> > +
> > +                       resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> > +                                <&pdc_reset PDC_MODEM_SYNC_RESET>;
> > +                       reset-names = "mss_restart", "pdc_reset";
> > +
> > +                       qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> > +
> > +                       power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
> > +                                       <&rpmhpd SDM845_CX>,
> > +                                       <&rpmhpd SDM845_MX>,
> > +                                       <&rpmhpd SDM845_MSS>;
> > +                       power-domain-names = "load_state", "cx", "mx", "mss";
> > +
> > +                       mba {
> > +                               memory-region = <&mba_region>;
> > +                       };
> > +
> > +                       mpss {
> > +                               memory-region = <&mpss_region>;
> > +                       };
> > +
> > +                       glink-edge {
> > +                               interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> > +                               label = "modem";
> > +                               qcom,remote-pid = <1>;
> > +                               mboxes = <&apss_shared 12>;
> > +                       };
> > +               };
> > +
> >                 sdhc_2: sdhci@8804000 {
> 
> Can you please sort by unit address now that you have a device tree
> that has more stuff?
> 

Of course, sorry for missing that.

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux