Hi,
On Mon, Jan 21, 2019 at 9:52 PM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> From: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
>
> This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.
>
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>
> Changes since v2:
> - Picked up Sibi's patch
> - Fixed reg to work with address/size-cells as 2
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++++++++++++++++
> 1 file changed, 58 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 5cc2615461da..78df5f1bce2d 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1617,6 +1617,64 @@
> clock-names = "xo";
> };
>
> + mss_pil: remoteproc@4080000 {
> + compatible = "qcom,sdm845-mss-pil";
> + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
> + reg-names = "qdsp6", "rmb";
> +
> + interrupts-extended =
> + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack",
> + "shutdown-ack";
> +
> + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> + <&gcc GCC_BOOT_ROM_AHB_CLK>,
> + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
> + <&gcc GCC_MSS_SNOC_AXI_CLK>,
> + <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> + <&gcc GCC_PRNG_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "bus", "mem", "gpll0_mss",
> + "snoc_axi", "mnoc_axi", "prng", "xo";
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> + <&pdc_reset PDC_MODEM_SYNC_RESET>;
> + reset-names = "mss_restart", "pdc_reset";
> +
> + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
> + <&rpmhpd SDM845_CX>,
> + <&rpmhpd SDM845_MX>,
> + <&rpmhpd SDM845_MSS>;
> + power-domain-names = "load_state", "cx", "mx", "mss";
> +
> + mba {
> + memory-region = <&mba_region>;
> + };
> +
> + mpss {
> + memory-region = <&mpss_region>;
> + };
> +
> + glink-edge {
> + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> + label = "modem";
> + qcom,remote-pid = <1>;
> + mboxes = <&apss_shared 12>;
> + };
> + };
> +
> sdhc_2: sdhci@8804000 {
Can you please sort by unit address now that you have a device tree
that has more stuff?
-Doug
