Re: [PATCH v2 0/9] Thermal throttling for SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 14, 2019 at 3:57 PM Rafael J. Wysocki <rafael@xxxxxxxxxx> wrote:
>
> On Mon, Jan 14, 2019 at 11:22 AM Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
> >
> > Add support for thermal throttling on SDM845.
> >
> > We introduce a generic flag to be used by cpufreq drivers to tell the
> > cpufreq core to auto-register a thermal cooling device.
> >
> > There are a few miscellaneous fixes to keep checkpatch happy.
> >
> > If this approach is acceptable I can send a series converting other cpufreq
> > drivers to use this flag and get rid of driver code.
> >
> > Amit Kucheria (9):
> >   [ALREADY QUEUED] cpufreq: qcom-hw: Move to device_initcall
> >   drivers: thermal: of-thermal: Print name of device node with error
> >   drivers: cpufreq: Add thermal_cooling_device pointer to struct
> >     cpufreq_policy
> >   cpufreq: Add a flag to auto-register a cooling device
> >   cpufreq: Replace open-coded << with BIT()
> >   cpufreq: qcom-hw: Register as a cpufreq cooling device
> >   arm64: dts: sdm845: Increase alert trip point to 95 degrees
> >   arm64: dts: sdm845: wireup the thermal trip points to cpufreq
> >   thermal: cpu_cooling: Clarify error message
> >
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 193 +++++++++++++++++++++++----
> >  drivers/cpufreq/cpufreq.c            |  13 ++
> >  drivers/cpufreq/qcom-cpufreq-hw.c    |   5 +-
> >  drivers/thermal/cpu_cooling.c        |   2 +-
> >  drivers/thermal/of-thermal.c         |   4 +-
> >  include/linux/cpufreq.h              |  34 +++--
> >  6 files changed, 210 insertions(+), 41 deletions(-)
>
> Would it be possible to split this series so as to put the cpufreq
> patches separately?

Sure, will send out another version.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux