Re: [Freedreno] [PATCH v2] drm/msm/dpu: add display port support in DPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-12-03 06:47, Sean Paul wrote:
On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
	- rebase on [2] (Sean Paul)
	- remove unwanted error checks and
	  switch cases (Jordan Crouse)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

Signed-off-by: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47
+++++++++++++++++++++++++----
 2 files changed, 45 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index d3f4501..1f6b4b1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct
dpu_encoder_virt *dpu_enc,
 {
 	int ret = 0;
 	int i = 0;
-	enum dpu_intf_type intf_type;
+	enum dpu_intf_type intf_type = INTF_NONE;

dpu_intf_type seems unnecessary, you could just use the DRM_MODE_ENCODER_*
value
directly?

enum dpu_intf_type enumerates HW interface types the SOC has. Below switch
case maps the DRM_MODE_ENCODER_* to HW dpu_intf_type it should reserve.
Note that DRM_MODE_ENCODER_* and dpu_intf_type are not mapped 1-to-1.
e.g. DRM_MODE_ENCODER_TMDS can be mapped to HDMI or DisplayPort.

Thanks,
Jeykumar S.

 	struct dpu_enc_phys_init_params phys_params;

 	if (!dpu_enc || !dpu_kms) {
@@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct
dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
-	default:
-		DPU_ERROR_ENC(dpu_enc, "unsupported display interface
type\n");
-		return -EINVAL;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	}

 	WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 985c855..7d931ae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct
drm_device *dev,
 	}
 }

+static void _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc;
+
+	if (!priv->dp)
+		return;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return;
+	}
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		drm_encoder_cleanup(encoder);
+		return;
+	}
+
+	priv->encoders[priv->num_encoders++] = encoder;

No need to keep track of drm resources at the driver level, the core will
do
this for you. So can you please add a patch preceding this one to remove
the
priv->encoders/crtc/planes/connectors arrays?

+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct
drm_device *dev,

Why are these functions voids? Seems like there are plenty of places for
them to
fail :)

Let's add a patch to the beginning of this series to properly handle
failures in
setup_displays and initialize_dsi

 {
 	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);

+	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+
 	/**
 	 * Extend this function to initialize other
 	 * types of displays
@@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct
msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;

-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles]
= i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	};

 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/freedreno

--
Jeykumar S



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux