On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote: > Add display port support in DPU by creating hooks > for DP encoder enumeration and encoder mode > initialization. > > This change is based on the SDM845 Display port > driver changes[1]. > > changes in v2: > - rebase on [2] (Sean Paul) > - remove unwanted error checks and > switch cases (Jordan Crouse) > > [1] https://lwn.net/Articles/768265/ > [2] https://lkml.org/lkml/2018/11/17/87 > > Signed-off-by: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 8 ++--- > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 47 +++++++++++++++++++++++++---- > 2 files changed, 45 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index d3f4501..1f6b4b1 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, > { > int ret = 0; > int i = 0; > - enum dpu_intf_type intf_type; > + enum dpu_intf_type intf_type = INTF_NONE; dpu_intf_type seems unnecessary, you could just use the DRM_MODE_ENCODER_* value directly? > struct dpu_enc_phys_init_params phys_params; > > if (!dpu_enc || !dpu_kms) { > @@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, > case DRM_MODE_ENCODER_DSI: > intf_type = INTF_DSI; > break; > - default: > - DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n"); > - return -EINVAL; > + case DRM_MODE_ENCODER_TMDS: > + intf_type = INTF_DP; > + break; > } > > WARN_ON(disp_info->num_of_h_tiles < 1); > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 985c855..7d931ae 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct drm_device *dev, > } > } > > +static void _dpu_kms_initialize_displayport(struct drm_device *dev, > + struct msm_drm_private *priv, > + struct dpu_kms *dpu_kms) > +{ > + struct drm_encoder *encoder = NULL; > + int rc; > + > + if (!priv->dp) > + return; > + > + encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS); > + if (IS_ERR(encoder)) { > + DPU_ERROR("encoder init failed for dsi display\n"); > + return; > + } > + > + rc = msm_dp_modeset_init(priv->dp, dev, encoder); > + if (rc) { > + DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc); > + drm_encoder_cleanup(encoder); > + return; > + } > + > + priv->encoders[priv->num_encoders++] = encoder; No need to keep track of drm resources at the driver level, the core will do this for you. So can you please add a patch preceding this one to remove the priv->encoders/crtc/planes/connectors arrays? > +} > + > /** > * _dpu_kms_setup_displays - create encoders, bridges and connectors > * for underlying displays > @@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct drm_device *dev, Why are these functions voids? Seems like there are plenty of places for them to fail :) Let's add a patch to the beginning of this series to properly handle failures in setup_displays and initialize_dsi > { > _dpu_kms_initialize_dsi(dev, priv, dpu_kms); > > + _dpu_kms_initialize_displayport(dev, priv, dpu_kms); > + > /** > * Extend this function to initialize other > * types of displays > @@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms, > info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE : > MSM_DISPLAY_CAP_VID_MODE; > > - /* TODO: No support for DSI swap */ > - for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) { > - if (priv->dsi[i]) { > - info.h_tile_instance[info.num_of_h_tiles] = i; > - info.num_of_h_tiles++; > + switch (info.intf_type) { > + case DRM_MODE_ENCODER_DSI: > + /* TODO: No support for DSI swap */ > + for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) { > + if (priv->dsi[i]) { > + info.h_tile_instance[info.num_of_h_tiles] = i; > + info.num_of_h_tiles++; > + } > } > - } > + break; > + case DRM_MODE_ENCODER_TMDS: > + info.num_of_h_tiles = 1; > + break; > + }; > > rc = dpu_encoder_setup(encoder->dev, encoder, &info); > if (rc) > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > > _______________________________________________ > Freedreno mailing list > Freedreno@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/freedreno -- Sean Paul, Software Engineer, Google / Chromium OS
