This patchset standardizes the onboard LEDs on 96Boards by maintaining common labels and triggers as below: green:user1 default-trigger: heartbeat green:user2 default-trigger: mmc0/disk-activity (onboard-storage) green:user3 default-trigger: mmc1 (SD card) green:user4 default-trigger: none, panic-indicator yellow:wlan default-trigger: phy0tx blue:bt default-trigger: hci0-power This standardization is required to provide a common behaviour of LEDs across all mainline supported 96Boards and also making it easier to control it using an userspace library like MRAA. For Rock960 and Ficus boards, the LED support is added in this patchset. Rest of the boards are converted to adopt the standard. Note: Since there is no UFS trigger available for now, user2 LED trigger is set to none on HiKey960. Thanks, Mani Changes in v2: * Removed device-name from LED labels as per the suggestion from Simon and Pavel * Adopted APQ8016 SBC (Dragonboard410c) * Tested the Ficus patch on Ficus V1.1 board * CCed LED mailing list Manivannan Sadhasivam (7): arm64: dts: rockchip: ficus: Add on-board LED support arm64: dts: rockchip: rock960: Add on-board LED support arm64: dts: hisilicon: hikey: Standardize LED labels and triggers arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers arm64: dts: hisilicon: poplar: Standardize LED labels and triggers arm64: dts: xilinx: ultra96: Standardize LED labels and triggers arm64: dts: qcom: apq8016-sbc: Standardize LED labels .../boot/dts/hisilicon/hi3660-hikey960.dts | 18 ++--- .../boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +-- .../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 17 ++-- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 +-- arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 78 ++++++++++++++++++ .../boot/dts/rockchip/rk3399-rock960.dts | 79 +++++++++++++++++++ .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 15 ++-- 7 files changed, 196 insertions(+), 36 deletions(-) -- 2.17.1
