Re: [PATCH v2 6/6] drivers: qcom: rpmh: write PDC data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 27, 2018 at 03:34:49PM +0530, Raju P L S S S N wrote:
> From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
> 
> In addition to requests that are send to the remote processor, the
> controller may allow certain data to be written to the controller for
> use in specific cases like wakeup value when entering idle states.
> Allow a pass through to write PDC data.
> 
> Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@xxxxxxxxxxxxxx>
> ---
>  drivers/soc/qcom/rpmh.c | 28 ++++++++++++++++++++++++++++
>  include/soc/qcom/rpmh.h |  6 ++++++
>  2 files changed, 34 insertions(+)
> 
> diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
> index 0d276fd..f81488b 100644
> --- a/drivers/soc/qcom/rpmh.c
> +++ b/drivers/soc/qcom/rpmh.c
> @@ -472,6 +472,34 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>  }
>  EXPORT_SYMBOL(rpmh_write_batch);
>  
> +/**
> + * rpmh_write_pdc_data: Write PDC data to the controller
> + *
> + * @dev: the device making the request
> + * @cmd: The payload data
> + * @n: The number of elements in payload
> + *
> + * Write PDC data to the controller. The messages are always sent async.
> + *
> + * May be called from atomic contexts.
> + */
> +int rpmh_write_pdc_data(const struct device *dev,
> +			const struct tcs_cmd *cmd, u32 n)
> +{
> +	DEFINE_RPMH_MSG_ONSTACK(dev, 0, NULL, rpm_msg);

At first I was concerned about the message being created on the stack
and sent asynchronously, however there is no asynchronous access
to the on-stack memory after returning from rpmh_rsc_write_pdc_data().

> +	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
> +
> +	if (!n || n > MAX_RPMH_PAYLOAD)
> +		return -EINVAL;
> +
> +	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
> +	rpm_msg.msg.num_cmds = n;
> +	rpm_msg.msg.wait_for_compl = false;
> +
> +	return rpmh_rsc_write_pdc_data(ctrlr_to_drv(ctrlr), &rpm_msg.msg);
> +}
> +EXPORT_SYMBOL(rpmh_write_pdc_data);
> +
>  static int is_req_valid(struct cache_req *req)
>  {
>  	return (req->sleep_val != UINT_MAX &&
> diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
> index 018788d..d5e736e 100644
> --- a/include/soc/qcom/rpmh.h
> +++ b/include/soc/qcom/rpmh.h
> @@ -28,6 +28,9 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>  
>  int rpmh_mode_solver_set(const struct device *dev, bool enable);
>  
> +int rpmh_write_pdc_data(const struct device *dev,
> +			const struct tcs_cmd *cmd, u32 n);
> +
>  #else
>  
>  static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
> @@ -56,6 +59,9 @@ static inline int rpmh_ctrlr_idle(const struct device *dev)
>  static inline int rpmh_mode_solver_set(const struct device *dev, bool enable)
>  { return -ENODEV; }
>  
> +static inline int rpmh_write_pdc_data(const struct device *dev,
> +				      const struct tcs_cmd *cmd, u32 n)
> +{ return -ENODEV; }
>  #endif /* CONFIG_QCOM_RPMH */
>  
>  #endif /* __SOC_QCOM_RPMH_H__ */

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux