Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Aug 8, 2018 at 12:13 PM, Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> Add a channel node for the die temperature to the ADC.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm8998.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index f70f6101bceb..499bae0afb7f 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -20,6 +20,11 @@
>                         #size-cells = <0>;
>                         #io-channel-cells = <1>;
>                         io-channel-ranges;
> +
> +                       die-temp {
> +                               reg = <ADC5_DIE_TEMP>;
> +                               label = "die_temp";
> +                       };

Seems to match the binding.

I'm no expert, but FWIW:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux