[PATCH 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the
'reg' property consists of two values, the SPMI address and the length
of the controller's registers. However the SPMI bus to which it is added
specifies "#size-cells = <0>;". Remove the controller register length
from the documentation of the field and the example.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index 0fb46137f936..d0c188e5c922 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,7 +13,7 @@ VADC node:
 - reg:
     Usage: required
     Value type: <prop-encoded-array>
-    Definition: VADC base address and length in the SPMI PMIC register map.
+    Definition: VADC base address in the SPMI PMIC register map.
 
 - #address-cells:
     Usage: required
@@ -104,7 +104,7 @@ Example:
 	/* VADC node */
 	pmic_vadc: vadc@3100 {
 		compatible = "qcom,spmi-vadc";
-		reg = <0x3100 0x100>;
+		reg = <0x3100>;
 		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.18.0.597.ga71716f1ad-goog

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux