[PATCH v1 2/3] dt-bindings: i3c: Document Qualcomm GENI I3C master bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Mike Shettel <mshettel@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/i3c/qcom,geni-i3c.txt      | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/qcom,geni-i3c.txt

diff --git a/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.txt b/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.txt
new file mode 100644
index 0000000..8b76fda
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.txt
@@ -0,0 +1,44 @@
+Bindings for Qualcomm Geni I3C master block
+===========================================
+
+Required properties:
+--------------------
+- compatible: shall be "qcom,geni-i3c"
+- clocks: shall reference the se clock
+- clock-names: shall contain clock name corresponding to the serial engine
+- interrupts: the interrupt line connected to this I3C master
+- reg: I3C master registers
+
+Optional properties:
+--------------------
+- se-clock-frequency: Source serial clock frequency to use
+- dfs-index: Dynamic frequency scaling table index to use
+
+Mandatory properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- #address-cells: shall be set to 3
+- #size-cells: shall be set to 0
+
+Optional properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- i2c-scl-hz
+- i3c-scl-hz
+
+I3C device connected on the bus follow the generic description (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details).
+
+Example:
+
+	i3c-master@0d040000 {
+		compatible = "qcom,geni-i3c";
+		clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+		clock-names = "se";
+		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0d040000 0x4000>;
+		#address-cells = <3>;
+		#size-cells = <0>;
+		i2c-scl-hz = <100000>;
+	};
+
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux