On Mon 30 Jul 23:32 PDT 2018, Vinod Koul wrote:
> Add PON binding and pwrkey and resin as child nodes for PON driver. Also
> add additional properties for pwrkey i.e., linux,code
>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/pm8916.dtsi | 27 ++++++++++++++++++++++-----
> 1 file changed, 22 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
> index 196b1c0ceb9b..f10800cf141a 100644
> --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> #include <dt-bindings/iio/qcom,spmi-vadc.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> #include <dt-bindings/spmi/spmi.h>
>
> &spmi_bus {
> @@ -18,12 +19,28 @@
> interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> };
>
> - pwrkey@800 {
> - compatible = "qcom,pm8941-pwrkey";
> + pon@800 {
> + compatible = "qcom,pm8916-pon";
> reg = <0x800>;
> - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> - debounce = <15625>;
> - bias-pull-up;
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
> +
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_POWER>;
> + };
> +
> + resin {
> + compatible = "qcom,pm8941-resin";
> + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_VOLUMEDOWN>;
> + };
> +
> };
>
> pm8916_gpios: gpios@c000 {
> --
> 2.14.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
