Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Taniya Das (2018-07-09 00:07:21)
> 
> 
> On 7/9/2018 11:46 AM, Stephen Boyd wrote:
> >>
> >>   > Why is the nocache flag needed? Applies to all clks in this file.
> >>   >
> >>
> >> This flag is required for all RCGs whose PLLs are controlled outside the
> >> clock controller. The display code would require the recalculated rate
> >> always.
> > 
> > Right. Why is the PLL controlled outside of the clock controller? The
> > rate should propagate upward to the PLL from here, so who's going
> > outside of that?
> > 
> The DSI0/1 PLL are not part of the display clock controller, but in the 
> display subsystem which are managed by the DRM drivers. When DRM drivers
> query for the rate clock driver should always return the non cached rates.

Why? Is the DSI PLL changing rate all the time, randomly, without going
through the clk APIs to do so?

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux