Hello Stephen,
Thanks for your review comments.
On 7/9/2018 5:24 AM, Stephen Boyd wrote:
Quoting Taniya Das (2018-06-23 07:19:27)
diff --git a/drivers/clk/qcom/dispcc-sdm845.c b/drivers/clk/qcom/dispcc-sdm845.c
new file mode 100644
index 0000000..af437e0
--- /dev/null
+++ b/drivers/clk/qcom/dispcc-sdm845.c
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: GPL-2.0
[...]
+static struct clk_alpha_pll disp_cc_pll0 = {
+ .offset = 0x0,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "disp_cc_pll0",
+ .parent_names = (const char *[]){ "bi_tcxo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_fabia_ops,
+ },
+ },
+};
+
+static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
+ .cmd_rcgr = 0x20d0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = disp_cc_parent_map_0,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "disp_cc_mdss_byte0_clk_src",
+ .parent_names = disp_cc_parent_names_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
Why is there the no cache flag? Last time I asked I don't think I got
any answer, and there isn't a comment here so please at least add a
comment to the code so we don't forget.
I think you missed my comment from the earlier email. I would add the
comment and submit again.
> Why is the nocache flag needed? Applies to all clks in this file.
>
This flag is required for all RCGs whose PLLs are controlled outside the
clock controller. The display code would require the recalculated rate
always.
+ .ops = &clk_byte2_ops,
+ },
+};
+
+static struct clk_rcg2 disp_cc_mdss_byte1_clk_src = {
+ .cmd_rcgr = 0x20ec,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = disp_cc_parent_map_0,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "disp_cc_mdss_byte1_clk_src",
+ .parent_names = disp_cc_parent_names_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ .ops = &clk_byte2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_esc0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 disp_cc_mdss_esc0_clk_src = {
+ .cmd_rcgr = 0x2108,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = disp_cc_parent_map_0,
+ .freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "disp_cc_mdss_esc0_clk_src",
+ .parent_names = disp_cc_parent_names_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 disp_cc_mdss_esc1_clk_src = {
+ .cmd_rcgr = 0x2120,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = disp_cc_parent_map_0,
+ .freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "disp_cc_mdss_esc1_clk_src",
+ .parent_names = disp_cc_parent_names_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
[...]
+
+MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION?
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
