On 2018-06-29 17:44, Andrzej Hajda wrote:
On 21.06.2018 14:32, Sandeep Panda wrote:
Innolux TV123WAM is a 12.3" eDP display panel with
2160x1440 resolution, which can be supported by simple
panel driver.
Are you sure this is Innolux? Quick grep on Internet finds only BOE
panel with this TV123WAM[1].
[1]:
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/TV123WAM_2D00_ND0_5F00_Product-spec_5F00_BOE_5F00_20161115_2D00_A00.pdf
The panel used here is innolux, which is a 2k panel. Where the BOE one
is a 1080p panel.
Regards
Andrzej
Changes in v1:
- Make use of simple panel driver instead of creating
a new driver for this panel (Sean Paul).
- Combine dt-binding and driver changes into one patch
as done by other existing panel support changes.
Changes in v2:
- Separate driver change from dt-binding documentation (Rob Herring).
- Add the properties from simple-panel binding that are applicable to
this panel (Rob Herring).
Signed-off-by: Sandeep Panda <spanda@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/display/panel/innolux,tv123wam.txt | 20
++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
diff --git
a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
new file mode 100644
index 000000000000..a9b35265fa13
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
@@ -0,0 +1,20 @@
+Innolux TV123WAM 12.3 inch eDP 2K display panel
+
+This binding is compatible with the simple-panel binding, which is
specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "innolux,tv123wam"
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ panel_edp: panel-edp {
+ compatible = "innolux,tv123wam";
+ enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+ power-supply = <&pm8916_l2>;
+ backlight = <&backlight>;
+ };
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
