On Wed 20 Jun 02:23 PDT 2018, Sricharan R wrote:
> Fix all nodes to use proper GIC_* macros for the interrupt type and the
> interrupt trigger settings to avoid the boot warnings.
>
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 41 ++++++++++++++++++++++---------------
> 1 file changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 1e0a3b4..70790ac 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -5,6 +5,7 @@
> #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
> #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
> #include <dt-bindings/soc/qcom,gsbi.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> model = "Qualcomm IPQ8064";
> @@ -43,7 +44,8 @@
>
> cpu-pmu {
> compatible = "qcom,krait-pmu";
> - interrupts = <1 10 0x304>;
> + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> reserved-memory {
> @@ -97,7 +99,7 @@
> clock-names = "ahbix-clk",
> "mi2s-osr-clk",
> "mi2s-bit-clk";
> - interrupts = <0 85 1>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "lpass-irq-lpaif";
> reg = <0x28100000 0x10000>;
> reg-names = "lpass-lpaif";
> @@ -111,7 +113,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 16 0x4>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> intc: interrupt-controller@2000000 {
> @@ -125,11 +127,16 @@
> timer@200a000 {
> compatible = "qcom,kpss-timer",
> "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
> - interrupts = <1 1 0x301>,
> - <1 2 0x301>,
> - <1 3 0x301>,
> - <1 4 0x301>,
> - <1 5 0x301>;
> + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_EDGE_RISING)>;
> reg = <0x0200a000 0x100>;
> clock-frequency = <25000000>,
> <32768>;
> @@ -177,7 +184,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x12490000 0x1000>,
> <0x12480000 0x1000>;
> - interrupts = <0 195 0x0>;
> + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -186,7 +193,7 @@
> i2c@124a0000 {
> compatible = "qcom,i2c-qup-v1.1.1";
> reg = <0x124a0000 0x1000>;
> - interrupts = <0 196 0>;
> + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
> clock-names = "core", "iface";
> @@ -215,7 +222,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x16340000 0x1000>,
> <0x16300000 0x1000>;
> - interrupts = <0 152 0x0>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -224,7 +231,7 @@
> i2c@16380000 {
> compatible = "qcom,i2c-qup-v1.1.1";
> reg = <0x16380000 0x1000>;
> - interrupts = <0 153 0>;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
> clock-names = "core", "iface";
> @@ -252,7 +259,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x1a240000 0x1000>,
> <0x1a200000 0x1000>;
> - interrupts = <0 154 0x0>;
> + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -261,7 +268,7 @@
> i2c@1a280000 {
> compatible = "qcom,i2c-qup-v1.1.1";
> reg = <0x1a280000 0x1000>;
> - interrupts = <0 155 0>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
> clock-names = "core", "iface";
> @@ -274,7 +281,7 @@
> spi@1a280000 {
> compatible = "qcom,spi-qup-v1.1.1";
> reg = <0x1a280000 0x1000>;
> - interrupts = <0 155 0>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
> clock-names = "core", "iface";
> @@ -301,7 +308,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x16640000 0x1000>,
> <0x16600000 0x1000>;
> - interrupts = <0 158 0x0>;
> + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -323,7 +330,7 @@
> compatible = "qcom,ipq806x-ahci", "generic-ahci";
> reg = <0x29000000 0x180>;
>
> - interrupts = <0 209 0x0>;
> + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&gcc SFAB_SATA_S_H_CLK>,
> <&gcc SATA_H_CLK>,
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
> is a member of Code Aurora Forum, hosted by The Linux Foundation
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
