Re: [PATCH] arm: dts: qcom: Fix 'interrupts = <>' property to use proper macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-06-20 14:53, Sricharan R wrote:
Fix all nodes to use proper GIC_* macros for the interrupt type and the
interrupt trigger settings to avoid the boot warnings.

 Thanks Sricharan for fixing these warnings.

 Applied over 4.18 rc1 and tested in IPQ8064 AP148 board.
 No backtraces are coming during boottime and IRQ seems OK.

 root@OpenWrt:/# cat /proc/interrupts
           CPU0       CPU1
 16:       2602       4750     GIC-0  18 Edge      gp_timer
 17:          0          0     GIC-0  26 Level     arm-pmu
 23:         19          0     GIC-0 241 Level     ahci[29000000.sata]
 24:        912          0     GIC-0 184 Level     msm_serial0
 25:        113          0     GIC-0 185 Level     i2c_qup
 26:          6          0     GIC-0 187 Level     1a280000.spi
IPI0:          0          0  CPU wakeup interrupts
IPI1:          0          0  Timer broadcast interrupts
IPI2:       2045       1713  Rescheduling interrupts
IPI3:          1          4  Function call interrupts
IPI4:          0          0  CPU stop interrupts
IPI5:          0          0  IRQ work interrupts
IPI6:          0          0  completion interrupts
Err:          0


Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>

Tested-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux