On Mon 02 Jul 05:44 PDT 2018, Amit Kucheria wrote:
> SDM845 uses v2.4.0 of the TSENS IP block but the get_temp() function
> appears to be identical across v2.x.y in code seen so far. We use the
> generic get_temp() function.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 2 ++
> drivers/thermal/qcom/tsens-v2.c | 6 +++++-
> drivers/thermal/qcom/tsens.c | 6 ++++++
> drivers/thermal/qcom/tsens.h | 5 ++++-
> 4 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 06195e8..075182e 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -5,6 +5,8 @@ Required properties:
> - "qcom,msm8916-tsens" : For 8916 Family of SoCs
> - "qcom,msm8974-tsens" : For 8974 Family of SoCs
> - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> + - "qcom,tsens-v2.4.0" : For SDM845 Family of SoCs
> + - "qcom,tsens-v2" : Generic fallback binding for any Soc using 2.x.y version of the tsens IP
>
> - reg: Address range of the thermal registers
> - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
> index 2eca7ff..1871945 100644
> --- a/drivers/thermal/qcom/tsens-v2.c
> +++ b/drivers/thermal/qcom/tsens-v2.c
> @@ -69,8 +69,12 @@ static const struct tsens_ops ops_generic_v2 = {
> .get_temp = get_temp_tsens_v2,
> };
>
> +const struct tsens_data data_tsens_v2 = {
> + .ops = &ops_generic_v2,
> +};
> +
> +/* Kept around for backward compatibility with old msm8996.dtsi */
> const struct tsens_data data_8996 = {
> .num_sensors = 13,
> .ops = &ops_generic_v2,
> };
> -
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 3440166c..992ed17 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -72,6 +72,12 @@ static const struct of_device_id tsens_table[] = {
> }, {
> .compatible = "qcom,msm8996-tsens",
> .data = &data_8996,
> + }, {
> + .compatible = "qcom,tsens-v2.4.0",
> + .data = &data_tsens_v2,
> + }, {
> + .compatible = "qcom,tsens-v2",
> + .data = &data_tsens_v2,
> },
> {}
> };
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index dc56e1e..69212cb 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -87,6 +87,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
> int init_common(struct tsens_device *);
> int get_temp_common(struct tsens_device *, int, int *);
>
> -extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
> +/* TSENS v1 targets */
> +extern const struct tsens_data data_8916, data_8974, data_8960;
> +/* TSENS v2 targets */
> +extern const struct tsens_data data_8996, data_tsens_v2;
>
> #endif /* __QCOM_TSENS_H__ */
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
